The microphone stand for the digital audio recorder is shipped in two pieces, the base and arm, in one box. The silver adapter used for mounting the recorder on the stand is already attached to the stand.
Following the instructions below will result in full extension of the stand. Feel free to make adjustments so that the digital audio recorder is comfortable for you to use.
Base
Beginning with the base, release the vertical twist lock, extend the first part of the center pole, then tighten the twist lock.
Unscrew the screw lock on the base to release the second part of the center pole, extend the pole, then tighten the screw lock.
Snap the three legs into place.
Arm
Unscrew the arm mount to let it hang loose from the arm.
Rescrew the arm mount when it is perpendicular to the arm.
Screw the arm onto the base.
Unscrew the arm mount again and allow the arm to swing parallel with the center pole of the base.
Retighten the arm mount.
Unscrew and extend the arm extensions in turn. Rescrew when the extensions are fully extended.
Repacking the Stand
Perform the stand assembly in reverse order
Insert the base into the box with the large, bulky end in first.
Insert the arm into the box with the digital recorder mount in last.